
Module Parameters
B-15
Enables or disables the Peer I/O output.
Sets the minimum time that a module will wait when transmitting
data to a peer.
Important: Changes to these parameters are ignored when
parameter 51 (Peer Out Enable) is On.
Sets the maximum time that a module will wait when transmitting
data to a peer. The value of parameter 52 (Peer Out Time) is
multiplied by the value of this parameter to set the time.
Important: Changes to this parameter is ignored when parameter
51 (Peer Out Enable) is On.
51 Peer Out Enable
Range: 0 = Off
1 = On
Default: 0 = Off
Type: Read/Write
Reset Required: No
52 Peer Out Time
Range: 0.01 to 10.00 sec
Default: 10.00 sec
Type: Read/Write
Reset Required: No
53 Peer Out Skip
Range: 1 to 16
Default: 1
Type: Read/Write
Reset Required: No
Comentarios a estos manuales