Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario descargar pdf (Pagina 51)

Configuring the Scanner or Bridge

5-3

Step 3. In the list, select the EtherNet/IP scanner or bridge used

by your controller and then select the major revision of its

firmware in the Major Revision box. In this example (figure

5.3), we use a 1756-ENBT EtherNet/IP Bridge (Series A),

so the 1756-ENBT/A option is selected.

Step 4. Click OK. The Module Properties dialog box (figure 5.4)

appears.

Step 5. Edit the fields listed in table 5.1 in the Module Properties

Dialog Box.

Figure 5.3 – Select Module Type Dialog Box

Figure 5.4 – Module Properties Dialog Box - Page 1

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 193 194

Sin comentarios

Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario Pagina 51