Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario descargar pdf (Pagina 128)

B-10

EtherNet/IP Communications Module

Configures the Master-Slave input data. This data is produced by

the Master device (for example, scanner or bridge) and consumed

by the module.

Configures the Master-Slave output data. This data is produced by

the module and consumed by the Master device (for example,

scanner or bridge).

35 M-S Input

Range: See figure B.3.

Default: xxx0 0001

Type: Read/Write

Reset Required: Ye s

Figure B.3 – M-S Input (35)

00010xxx

01234567

1 = I/O Enabled

0 = I/O Disabled

x =Not Used

Cmd/Ref

Datalink A

Datalink B

Datalink C

Datalink D

Not Used

36 M-S Output

Range: See figure B.4.