Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario descargar pdf (Pagina 150)

100

101

Editing ProgramsOn Line

Chapter 5

5-30

5. Press the softkey that corresponds to the mode you want to change.

(softkey level 5)

INCH/

METRIC

ABS/

INCR

PLANE

SELECT

DIA/

RADIUS

The control displays the mode that the next block is programmed i n

in the upper right hand corner of the screen. The modes and their

abbreviations are listed in Table 5.A.

Table 5.A

Changing Programming Modes During Digitizing

ModeChanged To: Abbr eviation G-code Generated Softkey

ABSOLUTE MODE ABS G90 {ABS/INCR}

INCREMENTAL MODE INC G91 {ABS/INCR}

PLANE SELECTED G17,G18,G19 G17, G18,G19 {PLANE

SELECT}

DIAMETER MODE DIA G08 {DIA/

RADIUS}

RADIUSMODE RAD G07 {DIA/

RADIUS}

INCHMODE INCH G20 {INCH/

METRIC}

METRIC MODE METRIC G21 {INCH/

METRIC}

Each time you press the softkey corresponding to the mode, the

displayed G-code changes.

6. When the mode you want appears, press the exit {

↑ } softkey to exit

the mode select screen.

This returns the control to s oftkey level 4. The next block generated

has the necessary G codes to change the mode inserted at the

beginning of the block.

Important: This does not change the current operating mode of the

control. The control only inserts the blocks to change the operating

mode in the program. The mode does not change unless that block is

executed or some other MDI or program block that changes modes is

executed.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 819 820

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario Pagina 150

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra