Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario descargar pdf (Pagina 275)

100

101

Communications

Chapter 9

9-15

Output Multiple Programs

Press {MULTI PRGRAM} to output more than one program.

After you pressed the {MULTI PRGRAM} key, the program

selected in step 4 is output. The program directory screen (see

Figure 9.3) appears with the following set of softkeys:

(softkey level 4)

OUTPUT

PRGRAM

FINISH

TAPE

Select the next program to output by selecting the file name as

describedinstep4. Pressthe{OUTPUTPRGRAM}keyto

output the program.

For details on how multiple programs are named,

see chapter 10.

ATTENTION: Be aware that the information in the directory

such as program name and comment are not

output to tape. If

you want to transfer this information to tape, you must include

the program name and comment from the directory in the first

block of the program. See chapter 10 for details on “O” word

program names.

After the last program is output to the tape, press

{FINISH TAPE} to punch the tape end code to the tape.

Important: If an error occurs or you abort the copy

operation while punching a tape, the tape may not be useable.

Output All Programs

Press {OUTPUT ALL} to copy all programs in memory to tape at

one time.

{OUTPUT ALL} works like {MULTI PRGRAM} except

that you cannot select the programs you want to output.

{OUTPUT ALL} selects all programs automatically and

outputs them to the peripheral device.

All programs are copied to the peripheral device and stored

using the same program name as the original, in the order that

they appear on the program directory screen.

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 819 820

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario Pagina 275

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra