Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario descargar pdf (Pagina 197)

Running a Program

To select a different part program for automatic execution, you must

deactivate the part program that is currently active. To do this, follow

these steps:

1. Press the {PRGRAM MANAGE} softkey. The control displays the

program directory screen as shown in Figure 7.2.

(softkey level 1)

OFFSET MACRO

Ifyo u see an: To the right of theprogramname,itmeansthatthe program is:

A currently active

E currently being edited

Figure 7.2 shows program TEST as active and being edited.

2. Press the

{ACTIVE PRGRAM} softkey. The control displays the first

few blocks of the currently active program.

(softkey level 2)

3. If the program selected is not the desired active program, press the

{DE-ACT PRGRAM} softkey. The control deactivates the part program

and returns to the directory screen.

(softkey level 3)

SEARCH MID ST

De-Selecting a Part Program

Sin comentarios

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Manual de usuario Pagina 197