Rockwell-automation SP600 User Manual Version 3.0 Manual de usuario descargar pdf (Pagina 240)

B-8

SP600 AC Drive User Manual

To restore all parameters to their factory-default values, select

Reset Defaults from the Memory Storage menu.

Note that the parameter values are retained through a line dip or

power shutdown.

B.7.2 Loading and Saving User Sets

Drive configurations, called user sets, can be saved and recalled for

use at any time. Up to three user sets can be saved in the SP600

drive.

To save the current drive configuration, select Save to User Set

from the Memory Storage menu. User Sets can not be saved if

Dynamic User Sets are enabled.

To recall, or load, a user set, select Load Frm Usr Set from the

Memory Storage menu. User Sets can not be restored if Dynamic

User Sets are enabled.

To identify which user set is active, select Active User Set from the

Memory Storage menu. The name of the last user set to be loaded

into the drive will be displayed. “Active Set” means factory defaults

have been restored.

Table B.2 – How to Adjust Each Parameter Type

Parameter

Type How to Adjust

Numbered List Use up/down arrow keys to advance through the list of

options.

Bit

Use to move the cursor to the bit location you

want to change. Use to change the value of

the bit.

Numeric

Use to increase or decrease the value.

- Or -

Use to move the cursor from digit to digit, and

use to increase or decrease the value of the

digit.

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 273 274

Sin comentarios

Rockwell-automation SP600 User Manual Version 3.0 Manual de usuario Pagina 240