Rockwell-automation 2071-Axx Kinetix 3 Component Servo Drive Serial Ho Manual de usuario descargar pdf (Pagina 101)

Rockwell Automation Publication 2071-RM001B-EN-P - April 2013 101

Standard Drive Parameters Appendix A

Group 7 - Manufacturing Settings

This parameter group includes product settings that are programmed during the

manufacturing process.

IMPORTANT

Group 7 - Manufacturing Settings are programmed at the factory.

Do not modify these settings, as they provide a common drive setup that is

useful when you do either of the following:

• Develop a drive system or troubleshooting a drive.

• Seek assistance through Rockwell Automation Technical Support.

[Pr - 7.00] Drive Capacity

Ultraware Name Drive Model

Range 50…1500

Default Factory settings determine default.

Units W

When Enabled Servo-Off -> Setting -> After power cycle (ENG mode)

Applicable Operating Mode All

[Pr - 7.01] DC Bus Voltage Offset

Ultraware Name Calibration: DC Bus Voltage Offset

Range -100…100

Default 0

Units V

When Enabled Servo-Off -> Setting -> After power cycle (ENG mode)

Applicable Operating Mode All

[Pr - 7.02] Reserved

When Enabled Reserved for future use.

[Pr - 7.03] Analog Monitor Output CH1 Offset

Ultraware Name Calibration: Analog Output CH1 Offset

Range -1000…1000

Default 0

Units mV

When Enabled Servo-Off -> Setting -> After power cycle, (ENG mode)

Applicable Operating Mode All

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 145 146

Sin comentarios

Rockwell-automation 2071-Axx Kinetix 3 Component Servo Drive Serial Ho Manual de usuario Pagina 101